Description

This Socket Jenie Raising & Lowering Fold Down Camper Roofs was designed in 2009, OAL is 3-7/8″ for a Viking/Coachmen Camper to fit into a 3/4″ winch pocket up to 1-3/8″ deep. Requires a 1/2″ drill chuck to fit the non-slip

• Made to lower and raise fold down camper roof
• While most cranks are round in design, this particular group of sockets is square. There are minor differences in the square part of the Socket Jenie, and you will need to verify that this model will fit your pop-up camper winch. The general dimensions are as follows:
  • The shank that fits into the winch pocket is slightly smaller than 3/4″ square is at .680
  • The square portion of the Socket Jenie will insert over 1″ into the winch pocket
  • The over-all body length of the Socket Jenie is 3 7/8″
• Note that the end that fits into your drill chuck has been machined precisely to fit a 1/2” drill chuck. This design WILL NOT slip if tightened properly with a chuck key.
• Use with a Cordless or Electric 1/2″ Drill
• Lifetime warranty

CAUTION: Due to the torque of the drill, serious injury can occur if the movement of the roof should suddenly be stopped.
Note: Can only be shipped out the ground by USPS

Socket Jenie Raising & Lowering Fold Down Camper Roofs