Description
The Socket Jenie Socket is made for users to operate the landing gear winch of a 5th wheel camper design, but it will also fit the winch system that raises the roof on a 2006 Coleman/Fleetwood fold-down camper.
- The hole through the body of the camper is slightly larger than 3/4″ and requires an extension into the camper of approximately 4 1/4″, has a 1/2″ rod with a pin installed across the centerline of the rod
- Winch access hole should be at the rear of the camper, thru the tire mount.
- It will not slip in the chuck, if the socket or camper roof suddenly stops moving, injury can occur.
- Dimensions: 12″ x 5″ x 5″
- Total length of the socket is 5 1/4″
- Part that fits into the drill chuck is 1″.
- End of the socket fits a 1/2″ drill chuck.
- Weight: 2 lbs
- Limited Lifetime Manufacturer Warranty
Be sure to use caution – due to the torque of the drill when the jack reaches home position and the only part that can turn is the operator’s arm.
Note: Can only be shipped out ground by USPS
Reviews
There are no reviews yet.