Description
Power Converter; Inteli-Power ® 2100 Series; Converts 105 To 130 Volt AC To 13.9 Volt DC; 650 Continuous Watts; 40 Amps Continuous Output; 80 Percent Efficiency; Digital Meter Displays Current/ Voltage/ Operation Mode/ Blown Fuse Indication And Battery Type; With Reverse Battery/ Thermal Protection; 10.9 Inch Length x 7.8 Inch Width x 4.2 Inch Height; With Built-In Microprocessor Controlled Four Stage Charger
MPN: PD2140V
The Electronic Marine Converter/Charger is capable of charging up to three separate banks of batteries at the same time. It incorporates a microprocessor that constantly monitors battery voltage, then automatically selects one of four operating modes to ensure safe, rapid recharging cycles. The Storage Mode and the Equalize Mode of operation ensures minimum battery gassing and water loss while preventing battery stratification and sulfation. All Inteli-Power chargers are designed to meet the stringent requirements of the Marine environment and are UL listed for safety. A digital meter displays current, voltage, operation mode, blown fuse indication, and battery type.
Converts: 105-130 Volt AC To 13.9 Volt DCContinuous Output Power: 650 WattAmpere Rating: 40 AmpNumber Of Outlets: 3Efficiency: 80 PercentLength: 11 InchWidth: 7-3/4 InchHeight: 4-1/4 InchRemote On/Off Capable: NoWith USB Port: NoWith Volt/Watt Meter: YesWith Short Circuit: NoWith Reverse Battery Protection: YesWith Thermal Protection: YesWith Battery Cables: NoWith Built-In Charger: YesWith Fuse: Yes
Features
- Provides Optimum-Charging Voltage At All Times During The Recharge Cycle
- Battery Voltage Is Constantly Monitored By The Microprocessor, Which Automatically Selects One Of Four Operating Modes
- 3 Diode Isolated Outputs- Allows The Converter/Charger To Charge Three Separate Banks Of Batteries. Each Output Is Capable Of Handling The Full Rated Current Of The Charger
- Patented Reverse Battery Protection- Prevents Converter/Charger From Being Damaged If The Batteries Are Accidentally Connected To The Charger In Reverse
- Over Voltage Protection- Prevents High Voltage Spikes From Damaging The Converter/Charger
- Electronic Current Limiting- Limits The Output Current To The Maximum Rating Of The Charger To Prevent Overheating And Damage Caused By Shorts Or Excessive Loads
- Automatic Over-Temperature Shutdown- Prevents Converter/Charger Damage In The Event The Fan Is Unable To Cool The Charger Due To Inadequate Compartment Ventilation
- Limited 2 Year Warranty
| Specifications of Progressive Dynamics PD2140V Inteli-Power – Power Converter 40 Amp | |
| Ampere Rating | 40 Amp |
| Continuous Output Power | 650 Watt |
| Converts | 105-130 Volt AC To 13.9 Volt DC |
| Efficiency | 80 Percent |
| Height | 4.2 Inch |
| Length | 10.9 Inch |
| Number Of Outlets | 3 |
| Remote On/Off Capable | No |
| Width | 7.8 Inch |
| With Battery Cables | No |
| With Built-In Charger | Yes |
| With Fuse | Yes |
| With Reverse Battery Protection | Yes |
| With Short Circuit | No |
| With Thermal Protection | Yes |
| With USB Port | No |
| With Volt/Watt Meter | Yes |
Reviews
There are no reviews yet.